NVT Phybridge is the global leader in long-reach Power over Ethernet (PoE) technology, enabling IP cameras, access control readers, intercoms, and other security devices to be powered and connected over distances that far exceed the 328-foot (100-meter) limitation of traditional Ethernet.
High-rise hotels and large resort properties often have extensive analog camera infrastructure. NVT Phybridge enables an upgrade to IP cameras along existing coax cable runs, across parking structures, pool decks, corridors, and remote building locations, without a complete re-cable.
Multi-family residential buildings with legacy wiring infrastructure can deploy IP cameras and access control devices throughout the property using NVT Phybridge extended PoE, eliminating costly rewiring through tenant spaces.
Warehouses, manufacturing facilities, and large commercial campuses benefit from NVT Phybridge when IP devices need to be deployed at distances exceeding standard PoE limits.
Long cable runs from gatehouse to perimeter cameras or remote access readers often exceed standard PoE limits. NVT Phybridge eliminates the need for intermediate switches or fiber runs in these applications.
The CLEER product family converts existing coaxial cable infrastructure to carry power and data for IP cameras and security devices. Purpose-built for properties upgrading from analog CCTV systems to IP cameras: the existing coax is repurposed, eliminating the need to run new cabling through finished walls and ceilings.
The FLEX series operates over existing multi-pair UTP (unshielded twisted pair) cabling found in many commercial and residential buildings. Ideal for properties with existing Category 3 or older cabling that would otherwise need replacement for modern IP devices.
The PoLRE (Power over Long Reach Ethernet) series operates over a single twisted pair, the type found in older telephone wiring infrastructure. Enables IP device deployment in buildings where running new structured cabling is cost-prohibitive.
18x farther than standard PoE, reaching remote cameras in large properties
Avoid full-building rewiring by using coax, multi-pair UTP, or single-pair infrastructure already in place
Powers high-wattage devices including PTZ cameras, heated enclosures, and access control panels
Approved for government and federal deployments
Infrastructure upgrade budgets dramatically reduced when existing cabling can be reused
Years in the industry, licensed since 2004
Completed installations across the U.S.
Structured cabling, fiber and rack builds that carry security traffic on properly segmented infrastructure.
View page
Enterprise-grade IP camera systems with intelligent analytics, cloud storage and remote monitoring.
View page
Cloud and on-premise platforms that secure your facilities while providing real-time monitoring and control.
View pageNVT Phybridge products extend PoE up to 6,000 feet (approximately 1,800 meters) depending on cable type and device power requirements, compared to 328 feet (100 meters) for standard PoE.
NVT Phybridge transmitters connect to standard PoE IP cameras and devices using a standard RJ45 Ethernet port. They are compatible with virtually all major IP camera brands including Axis, Hanwha, Verkada, Hikvision, Dahua, and others.
NVT Phybridge has three product families for different cabling types: CLEER for coaxial cable, FLEX for multi-pair UTP, and PoLRE for single-pair UTP (telephone wire). A site assessment determines which product family is appropriate for your existing infrastructure.
In many applications, yes. NVT Phybridge can substitute for fiber optic cable at distances beyond standard PoE limits, at a significantly lower cost, especially when existing copper infrastructure is already in place.
Yes. NVT Phybridge products are TAA (Trade Agreements Act) and NDAA (National Defense Authorization Act) compliant, making them suitable for government facilities and federally funded projects.
